NG Platinum Trainer for 8051 Microcontrollers.
Model: NG Platinum 8051.
ATMEL AT89C52 operating at 12MHz.
RAM 32K Bytes with Battery Backup.
EPROM 32K Bytes.
Graphical LCD to display up to 8 lines of 21 Characters to display all information about the Trainer operations.
PC 101 keyboard.
Independent Serial communication facility to PC for program debugging purpose.
Controller’s Serial Port is available for user’s application.
Built-in single line assembler and disassembler.
16 Input and 16 output port lines are available.
Onboard user interfacing facilities: 6 numbers of point LEDs. (P1.4, P1.5, P1.6, P1.7, RXD and TXD).
3 numbers of Push button switches (INT0, INT1 and T1) to interact with Interrupt And Timer signals.
2 Nos of Toggle Switches (P1.2, P1.3).
Bus Lines and I/O lines are terminated for userís convenience.
Self Diagnostic Facility:
Microcontroller health and performance.
Memory Testing.
Power Supply monitoring.
Facility to Indicate diagnostic results in the display.
Facility to analyze serial port of the controller. (Useful for serial communication experiments)
Onboard Facility of 64K Byte to store application programs in a non-volatile memory with file management.
Free Windows based Topview Debugger with C source level debugging, Compatible to SDCC C compiler, to save project development time. No other Trainer has this Facility.
Complimentary CDROM with useful documentation and Utilities.
Detailed Documentation:
Trainer Hardware User Guide.
Topview Debugger Software User Guide.
Software Examples Manual.
Including suitable power supply.
A complementary CDROM is available with every 8051 trainers. The CDROM contains many useful utilities/documentation:
eBook on Embedded System Design using 8051 Microcontroller.
Cross Assembler for 8051 family devices.
Topview Debugger meant for the trainer.
Free SDCC C compiler.
Documentation on Atmel’s 8051 family devices.
MAGNA Plus 31- 8051 Microcontroller Trainer.
Low Cost Learning Tool for Worldís most popular 8051 Microcontroller families.
ATMEL AT89C52 operating at 12MHz.
Atmelís on chip Flash Memory 8K.
32K Byte RAM for userís applications with Battery backup.
Optional 32K byte EPROM.
6 Digits of 7 Segment Green Color Displays.
24 High performance keys.
Serial Communication facility to the personal computers.
All standard trainer monitor facilities are available.
LEDs (6 numbers), Push Button Switches (4 numbers) and 2 numbers of Toggle
Switches are available onboard for userís experiments.
Facility to study Interrupt structure and Timer / Counter of the microcontroller.
Bus lines and I/O lines are terminated for userís convenience.
Free Windows based Topview Debugger that saves your project development time. No other Trainer has this Facility.
The Trainer can be used for Real time Applications.
Complimentary CDROM with useful documentation and Utilities.
Including suitable Power Supply.
Detailed Documentation:
Trainer Hardware User Guide.
Topview Debugger Software User Guide.
Software Examples Manual.
Complementary CDROM.
A complementary CDROM is given free of cost with every order of 8051 trainers. The CDROM contains many useful utilities/documentation:
eBook on Embedded System Design using 8031 Microcontroller .
Cross Assembler for 8051 family devices.
Topview Debugger meant for the trainer.
Documentation on Atmel’s 8051 family devices.
Interface Cards
i.LCD Interface Card.
This experimental module is meant for studying about interfacing LCD module with the Microcontroller/Microprocessor.
LCD with 2 lines X 16 characters.
Study of 4-bit/8-bit display interfacing.
The module is connected with the Microcontroller through bus lines.
ii.Keyboard Interface Card.
This interface is meant for studying about connecting a keypad with the Microcontroller.
Keyboard with 4X4 Matrix.
Interfaced through port lines of the controller.
Detailed manual with flowchart and example programs is available.
iii.Switches, LEDs and Relays Interface Card.
This is the most used interfacing in any Microcontroller environment. The experimental module gives required knowledge about connecting toggle switches, Relays, Momentary switches and also point LEDs.
2 Toggle Switches.
2 Momentary Switches.
2 Relays.
2 Point LEDs.
LED indicators for relays.
All the switches/relays are connected with the port lines of the controller.
iv.7 Segment Display Interface Card.
The experimental setup is meant for studying on connecting 7 segment LED display in all possible configurations.
4 digits of Green color 7 segment LED displays.
Possible to study the display in following configurations:
Multiplexed Display.
Non-Multiplexed Display.
BCD input to the display.
7 segment input to the display.
Onboard facilities to study all the above display interfacing.
v.Stepper Motor Interface Card With Stepper Motor.
Onboard Stepper Motor, with suitable motor drivers.
LED indicators for each winding.
Detailed manual with example program
vi.8251 Interface Card.
Provision to study programmable communication interface IC 8251 completely.
LED indicators for all RS 232 lines.
Provision for loop back test.
vii.8253 Interface Card.
8253 with onboard clock circuitry.
Facility to generate square waveform.
Facility to study 8253 in different modes.
Onboard LED indicators for useful interactions.
viii.8255 Interface Card.
Study on 8255 in all three modes.
LED indicators, DIP switches are provided for simulation.
Provision for studying 8255 completely.
ix.8259 Interface Card.
Programmable Interrupt Controller IC 8259 is used.
8 Push button Switches are provided for giving interrupts.
LED indicators are provided.
x.8279 Interface Card.
4 Digits of 7 segment LED display.
4X4 Key matrix with 16 keys and 2 keys for shift & control operation.
Facility to study various keypad and display configurations.
Detailed manual with example program
xi. ADC & DAC Interface Card.
4 Channels of differential inputs for the ADC.
14 bit ADC for high accurate experiments.
Onboard voltage generator for ADC input.
Solid state temperature sensor LM35 on board to study ADC.
One channel DAC with 8-bit resolution.
Provision to generate Unipolar, Bipolar analog output voltages.
Detailed manual with example program
xii.Dc Motor Interface Card.
A 6V DC motor is used.
Infra red sensors are used to generate pulses to calculate the speed of motor.
An 8 bit DAC is used to control the speed of motor.
All the required sources to implement a closed loop DC Motor control using Microcontroller / Microprocessor.
xiii.Temperature Controller Card.
Solid State temperature sensor LM35 / AD590 is used to read the temperature.
8 bit ADC is used for temperature measurement.
LED indicator for heater ON / OFF condition.
Facility to study the characteristics of a temperature control system.
xiv. Printer Interface Card.
Provision to connect Centronics printer.
LED indicators for Data and Control lines.
Facility to study printer interfacing completely.
xv.Parallel Interface Card
Study of Parallel Communication between two Microprocessor kits using 8255.
Study of various modes of 8255 in Parallel Communication.
Detailed manual with example program.
xvi.Digital Clock Interface Card.
RTC with battery backup.
4 Push button Switches are provided for Timer Control.
Detailed manual with example program.
Traffic Light Controller.
On board LEDís to simulate traffic signals at a point where four roads meet.
On board LEDís are included for the pedestrians also.
Detailed manual with example program
15,917 thoughts on “8051/8031 Microcontroller Trainers”