TMS320C6713-Trainer-feature-image

TMS320C6713 DSP Trainer

Posted by admin-front on

TMS320C6713 DSP Trainer.

TMS320VC6713 operating from 16 to 160MHz.
On-Board RAM: 256Kbyte.
Onboard DRAM storage facility of 32MBytes.
2 channels of high speed, high resolution 16 bit Analog to Digital converter with sampling rate of 1Msps.
16-bit high performance AUDIO CODEC.
Emulator interfacing facility.
USB Port and the Serial port with RS232 drivers.
Two numbers of 64-pin expansion connectors to interface external hardware.
Power Supply and Function generator.
Experiment manual to study DSP algorithms such as FIR filter, Convolution, FFT etc.
Trial copy of Code Composer Studio Development Software.
Mounting the above trainer in a closed cabinet with following:
RFI filtered linear power supply
Output frequency up to 20 kHz.
Sine, Square and Triangle signals limited to DSP AIC Input range.
Over voltage protection for analog inputs.
Facility to Measure FREQUENCY OUTPUT for user convenience during DSP Experiments.
Facility to use the DSP Hardware in any Embedded System with the add-on ProtoBoard facilities.
DSP Kit is safely mounted in a sleek wooden cabinet.

TMS320VC5416-Trainer-feature-image

TMS320VC5416 DSP Trainer

Posted by admin-front on

TMS320VC5416 operating at 160MHz.

On-Chip RAM: 128K Word.
Booting Facility: 128K bytes Flash Memory with communicating kernel meant for the computer.
16/20/24/32-bit high performance AUDIO CODEC using TLV320AIC26
Stereo Audio DAC and Mono Audio ADC Support Rates up to 48 kbps.
On-Chip 325-mW Speaker Driver.
Microphone Preamp and Hardware Automatic Gain Control.
Programmable Digital Audio Bass/Treble/EQ/De-Emphasis.
Emulator interfacing facility.
USB Port and the Serial port with RS232 drivers.
Two numbers of 64-pin expansion connectors to interface external hardware.
Topview DSP Debugging Software with following features:
Simple and Powerful command set.
Program code, data and CPU Registers are simultaneously displayed in separate
Windows.
View and edit facility for DMA and McBSP sub bank registers.
Supports assembly level debugging.
C Source debugging facility with variables view/edit facility.
Supports single step, step over and break point execution.
Fill, Test and Move operations for both Data and Program memory.
Graphical display of memory contents in both time and frequency spectrum.
Power Supply and Function generator.
Experiment manual to study DSP algorithms such as FIR filter, Convolution, FFT etc.
Trial copy of Code Composer Studio Development Software.

Power Supply and Function Generator.
(Mounting the above trainer in a closed cabinet with following)

RFI filtered linear power supply
Output frequency up to 20 kHz.
Sine, Square and Triangle signals limited to DSP AIC Input range.
Over voltage protection for analog inputs.
Facility to Measure FREQUENCY OUTPUT for userís convenience during DSP
Experiments.
DSP trainer is safely mounted in a sleek wooden cabinet.

Bundle Contents:

TMS320V5416 Starter Kit
CDROM with useful documents and software.
Power Supply.
Serial Port and USB Communication Cables.
Analog Input/Output cable
TMS320VC5416 Starter Kit User Guide.
TLV320AIC26 Chip Details (Soft Copy)

TMS320C50 DSP Trainer

Posted by admin-front on

TMS 320C50 operating at 41MHz.
On-chip RAM: 10K Word
32KB EPROM with communication kernel.
Analog Interface Chip with 14-bit Analog to Digital Converter and 14-bit Digital to Analog Converter with 16 bit dynamic range.
Programmable sample rate up to 43KHz.
Programmable +3V/-3V full-scale input.
Programmable +3V/-3V full-scale output into 600 ohms load. It can drive an 8-ohm speaker directly.
Programmable anti-aliasing and reconstruction filters.
Over voltage protection for analog inputs.
Facility to connect MIC and speaker.
Built-in USB interface to use the kit with latest OS of the computers.
With Assembler and the Topview DSP Debugger software with Graphical User Interface.

Power Supply and Function Generator.
(Mounting the above kit in a closed cabinet with following)
RFI filtered linear power supply
Output frequency up to 20 kHz.
Sine, Square and Triangle signals limited to DSP AIC Input range.
Over voltage protection for analog inputs.
Facility to Measure FREQUENCY OUTPUT for user convenience during DSP
Experiments.
DSP Kit is safely mounted in a sleek wooden cabinet.

Bundle Contents.

TMS320C50 Starter Kit
CDROM with useful documents and software.
Power Supply.
Serial Port Communicating Cable.
Analog Input/Output cable.?
TMS320C50 Starter Kit Technical Reference Manual.
TMS320C50 Starter Kit Experiments Manual.
TLC320AC01 Chip Details (Soft Copy)
TMS320C5X Userís Guide (Soft Copy)